CMR10048 pv input 150v mppt solar charge controller 100a
MPPT Solar Charge Controller | 100A | 12V/24V/36V/ 48V(Auto) | PV Voltage: 150Vdc
GRANKIA CMR10048 pv input 150v mppt solar charge controller 100a was designed for large-scale projects, both mobile and stationary.
For even more power, the users can utilize a unique feature limited to this mppt solar charger and connect two 100A solar controllers in parallel for a total of 200 amps!
CMR10048 mppt solar charge controller 100a can also conveniently self-diagnose itself in the event of an error and can be remotely controlled through the DC home app.
MPPT Solar Charge Controller 100A Feature
- Compatible for PV systems in 12V, 24V, 36V, 48V
- Fast MPP Tracking
- Maximum power point tracking efficiency over 99.5%
- PV INPUT 150V max Voc
- Built-in lithium battery activation function
- Support Sealed, GEL, Flooded, and Lithium-ion battery
- Three stages charging optimizes battery performance
- Die-cast aluminum design allows for efficient heat dissipation
- Ability to output in parallel to power DC loads
- Real-time energy statistic function
- Very advanced monitoring app
- Dual RS-485 communication interface allows for easy programming, control and remote monitoring
Setting UP Off-grid Solar System
MPPT Solar Regulator FAQ
-
Does MPPT reduce voltage?
MPPT controllers convert the higher voltage DC output from solar panels down to the lower voltage needed to charge batteries.
-
Is MPPT solar regulator same as solar charger?
The crux of the difference is: With a PWM controller, the current is drawn out of the panel at just above the battery voltage, whereas. With an MPPT solar regulator the current is drawn out of the panel at the panel “maximum power voltage”.
-
Do I need a fuse between solar panel and MPPT charger?
They are not necessary for the system to run properly, but we always recommend using fuses or circuit breakers for safety purposes.
The Articles You may Like
| Model | CMR10048 | |
| MPPT Efficiency | ≥99.5% | |
| System Voltage | 12V/24V/36V/48V(Auto) | |
| Voltage Range | 12V | 9VDC-15VDC |
| 24V | 18VDC-30VDC | |
| 36V | 27VDC-45VDC | |
| 48V | 36VDC-60VDC | |
| Li-ion Battery | 8VDC-60VDC(Adjustable) | |
| Dimension | 380x210x80mm | |
| Net Weight | 5.0 Kgs | |
| PV INPUT | ||
| Max. PV Input Voltage | 150VDC | |
| Min. Vmpp Voltage | Battery voltage +2V | |
| Start-up Charging Voltage | Battery voltage +3V | |
| Low INPUT Voltage Protection | Battery voltage +2V | |
| Over Voltage Protection | 150VDC | |
| Recovery Voltage Protection | 145VDC | |
| PV Rated Input Power | 12V | 1300W |
| 24V | 2600W | |
| 36V | 3900W | |
| 48V | 5200W | |
| Li-ion Battery | 1260W-5040W | |
| DC LOAD OUTPUT | ||
| Load Voltage | Same as battery voltage | |
| Load Current | 50A | |
| Low Voltage Protection | 10.5VDC, 11VDC restored (Settable) | |
| Setting Parameters | Via PC software / APP / Self | |
| CHARGE | ||
| Battery Type | Sealed(SEL), Gel(GEL), Flooded(FLD), Lithium-ion(Lit), User-defined(USE) | |
| Charging Mode | MPPT (Maximum Power Point Tracking) | |
| Charging Current | 100A | |
| Charging Method | 3-stage: CC (Constant current) – CV (Constant voltage) – CF (Float charge) | |
| Temperature Compensation | -3mV/℃/2V | |
| Active Lithium Battery Function | Optional | |
| SYSTEM | ||
| Protection Function | Input low/over voltage, input/output polarity reverse connection, short circuit, over temperature, battery shedding etc. | |
| Display | HD LCD | |
| Communication | Dual RJ45/RS485, WIFI/Bluetooth(optional) | |
| ENVIRONMENT | ||
| Protection Level | IP21 | |
| Relative Humidity | 0 ~ 90% (Non-condensing) | |
| Altitude | < 3000m | |
| Operating Temperature | -20℃~+50℃ | |
| Storage Temperature | -40℃~+75℃ | |
| Noise | < 10dB | |
Online Chat
Scan code to chat by WhatsApp
